您需要找什么?

该项搜索需输入更多信息。
 

概述

The Model A-205a high level output, flush diaphragm pressure transducer features 4 mA to 20 mA, 1 Vdc to 5 Vdc or 1 Vdc to 10 Vdc (unipolar) output with an unregulated power supply. Model A-205a gage pressure transducers are manufactured with a unitized 17-4 PH Stainless Steel diaphragm. 这类设计的优点在于薄薄的膜片和厚重的侧壁由同一片不锈钢制作而成。This unitized diaphragm is rug­ged, but at the same time can be made thin enough to measure low pressures. 可用压力范围量程从 300 psig 至 10000 psig。这些型号可用于腐蚀性液体环境。

Model A-205a has welded electrical connectors as an integral part of the transducer body and recommended for applications involving rough handling or where an all-welded stainless steel transducer is required.All units have four (4) active bonded strain gages arranged in a Wheatstone-bridge configuration.

特性

  • 300 psig 到 10000 psig
  • 齐平膜片
  • 无死区容积
  • Fully welded construction
  • 不锈钢
  • 1/4-18 NPT mounting threads
Model A-205a Pressure Transducers - 霍尼韦尔


文档

标题 文档类型 语言 尺寸
A-205A 型压力传感器数据表 数据表 英语 207KB
Model A-205a Front View 图片 英语 63KB
Model A-205a Bottom View 图片 英语 97KB
Model A-205a Top View 图片 英语 85KB
Model A-205a Top Angle View 图片 英语 81KB
T&M 压力传感器产品目录 产品目录 英语 1MB
交通运输和医疗 (T&M) 概述手册 手册 英语 413KB
适用于航空航天测试和测量应用 应用说明 英语 2MB

语言

社交媒体

网站信息

网站地图

条款和条件

全局取消订阅

版权所有 © 2020Honeywell international inc .
沪ICP备15008415号-1

Powered By OneLink