Three series of products to complement the Limitless™ Series of switches and sensors.
The WMPR Series is a reliable DIN Rail or panel-mountable receiver that is designed to receive a wireless signal from a Limitless™ digital or analog input or node. The WMPR Series receiver then communicates the Limitless™ digital or analog node status (i.e., switch open or closed, pressure value) to an EtherNet/IP™ compliant Master device (i.e., programmable logic controller). The WMPR has been tested with “Modbus™ coupler” devices that allow providing a Modbus/TCP output. When compared to traditional wired solutions, Honeywell’s wireless solutions can greatly reduce the costs of wiring, installation, and maintenance by eliminating the need for conduit, connectors, and wire while significantly reducing installation and labor costs.
The WDRR Series is a reliable DIN Rail or panel-mountable receiver that is designed to receive a wireless signal from a Limitless™ digital input. The WDRR receiver then communicates the Limitless™ digital input status (i.e., switch open or closed) to a PLC (programmable logic controller) or any host controller capable of NPN/PNP-type inputs. The WDRR has been tested with a PLC and Modbus™ coupler from three different manufacturers which also allows providing a Modbus/TCP output. Honeywell’s wireless solutions can save up to 60% compared to traditional wired solutions by eliminating the need for conduit, connectors, and wire while significantly reducing installation and labor costs. Accommodating up to 14 Limitless™ digital inputs, the WDRR Series is for applications requiring multiple wireless inputs. These inputs communicate to a PLC or host controller via NPN or PNP-type output, along with RF communication and battery diagnostics. Blue LEDs give visual confirmation that the system is wirelessly connected.
The WPMM Series Wireless Panel-Mount Monitor is designed to receive a wireless signal from a Honeywell Limitless™ device. When the WPMM monitor receives the signal, the monitor provides indication of a wireless device change-of- state via integral LEDs, audible alarm, and the output turning on. Output types include NPN, PNP, or a solid state relay. While the WPMM monitor is designed primarily for a single wireless device, the monitor can accept signals from multiple wireless devices. The monitor will acknowledge when a signal is received, but not necessarily identify which wireless device transmitted the signal.
Make a selection to narrow in on the product that's right for you.
Multi-protocol receiver ● Ethernet/IP™ output ● ODVA certified ● Accommodating up to 14 Limitless™ digital or analog nodes
DIN Rail receiver ● NPN, PNP selectable output ● SPDT, DPDT ● Accommodating up to 14 Limitless™ digital inputs
|Limitless™ Safety Shower and Eye Wash Alarm Solutions||Application Note||English||1MB|
|Crane Jib/Two Block Assembly Application||Application Note||English||109KB|
|Wireless Technology for Conveyor Systems||Application Note||English||197KB|
|Limitless™ Wireless Solutions in Anti-Two Block Warning Systems for Cranes, Stationary and on Trucks||Application Note||English||4MB|
|Limitless™ Wireless Solutions in Industrial Tank Level Monitoring||Application Note||English||2MB|
|Limitless™ Wireless Solutions on Automotive Factory Floors||Application Note||English||11MB|
|Limitless™ Wireless Solutions on Hangar Doors||Application Note||English||1MB|
|White Paper: Advantages of Combining Intrinsically Safe Equipment and Wireless Technology in Process Manufacturing||White Paper||English||6MB|
|White Paper: Industrial Communication Protocols||White Paper||English||2MB|
|Oil and Gas Brochure||Brochure||English||4MB|
|Technical Note: Best Practices to Improve RF Signal Quality||Technical Information||English||342KB|
|Wireless Technology for Retractable Roof Systems||Application Note||English||6MB|
|Technical Note: Wireless Network Security and Data Reliability||Technical Information||English||766KB|
|White Paper: Wireless Switches Offer Unlimited Benefit||White Paper||English||122KB|