The SMART Position Sensor is one of the most durable, adaptable, and lightweight linear position sensors available in the industry, enabling highly accurate motion control and improving operation efficiency and safety. Its simple, non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime.
The SMART Position Sensor is a non-contacting sensing solution for absolute position sensing with enhanced accuracy. It senses the position of a magnet relative to the sensor in one of three available sensing ranges:
These sensors uses a patented combination of an ASIC (Application-Specific Integrated Circuit) and an array of MR (magnetoresistive) sensors to accurately and reliably determine the position of a magnet attached to a moving object so that the object’s position can be determined or controlled.
The MR array measures the output of the MR sensors mounted along the magnet’s direction of travel. The output and the MR sensor sequence determine the nearest pair of MR sensors to the center of the magnet location. The output of these two MR sensors is then used to determine the position of the magnet between them.
With this sensor, Honeywell has utilized MR technology through the ASIC at a level never before accomplished. This product is available in both analog output (35 mm, 75 mm and 225 mm configurations) and digital output (225 mm configuration only) for use in control systems requiring an RS232-type interface with a 57.6 kbits/s baud rate.
|Position Sensors Line Guide||Product Line Guide||English||617KB|
|SMART Position Sensor, 35 mm, 75 mm, 225 mm Linear Configurations||Datasheet||English||3MB|
|50047793: SMART Position Sensor, Linear Configurations, Issue 4||Installation Instructions||English||589KB|
|Transportation Range Guide||Product Range Guide||English||4MB|
|Position Sensors Range Guide||Product Range Guide||English||1MB|
|SMART Position Sensors||Product Nomenclature Tree||English||347KB|
|SMART Position Sensors, Linear Configurations||Application Note||English||503KB|
|Value Added SMART Position Sensors, 35 mm Linear Configuration, for Gear Position Sensing in Automated Manual Transmission||Application Note||English||1MB|
|Sensors and Switches in Front Loaders||Application Note||English||200KB|
|Sensors and Switches for Potential Medical Applications||Application Note||English||374KB|
|Sensors and Switches in Valves and Flow Meters||Application Note||English||2MB|
|Animated PowerPoint Demo||Technical Information||English||1MB|
|Sensors and Switches in Mobile Cranes||Application Note||English||194KB|
|SPS-L035-LATS||Linear||0 mm to 35 mm [0 in to 1.38 in]||TYCO Super Seal 282087-1 integral connector||0.55 Vdc to 4.15 Vdc analog|
|SPS-L075-HALS||Linear||0 mm to 75 mm [0 in to 2.95 in]||cable with flying leads||0 Vdc to 5 Vdc analog|
|SPS-L225-HALS||Linear||0 mm to 225 mm [0 in to 8.86 in]||cable with flying leads||0 Vdc to 5 Vdc analog|
|SPS-L225-HDLS||Linear||0 mm to 225 mm [0 in to 8.86 in]||cable with flying leads||RS232-type digital|