The TruStability® Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.
The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports.
The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.
All products are designed and manufactured according to ISO 9001 standards.
|TruStability® Board Mount Pressure Sensors: SSC Series||Datasheet||English||5MB|
|TruStability® Board Mount Pressure Sensors: HSC Series and SSC Series||Installation Instructions||English||4MB|
|Airflow, Force, and Pressure Sensors Range Guide||Product Range Guide||English||885KB|
|Board Mount Pressure Sensors Line Guide||Product Line Guide||English||224KB|
|Board Mount Pressure Sensors Selection Guide||Selection Guide||English||361KB|
|I²C Communications with Honeywell Digital Output Pressure Sensors||Technical Information||English||209KB|
|Diagnostics for TruStability® Board Mount Pressure Sensors, HSC and SSC Series Technical Note||Technical Information||English||132KB|
|TruStability® Active Listings (as of September 2014)||Active Listings||English||1MB|
|Industrial Product Line Card||Line Card/Selection Chart||English||571KB|
|Sensors in Anesthesia Machines||Application Note||English||3MB|
|Sensors and Switches in Oxygen Concentrators||Application Note||English||2MB|
|Sensors and Switches for Potential Medical Applications||Product Range Guide||English||2MB|
|Pneumatic Interface Recommendations for TruStability® Board Mount Pressure Sensors, HSC, SSC, TSC, NSC Series Technical Note||Technical Information||English||58KB|
|Sleep Mode for Use with Honeywell Digital Pressure Sensors: ASDX Series, APB Series, and Trustability® HSC, SSC Series||Technical Information||English||325KB|
|SPI Communication with Honeywell Digital Output Pressure Sensors||Technical Information||English||208KB|
|Sensors in Infusion Pumps||Application Note||English||2MB|
|Sensors in Hemodialysis Machines||Application Note||English||294KB|
|Sensors in Sleep Apnea Machines||Application Note||English||2MB|
|Sensors in Ventilators||Application Note||English||2MB|
|Sensors and Switches in Chemistry and Immunoassay Analyzers||Application Note||English||1MB|
|Sensors and Switches for Potential Medical Applications||Application Note||English||842KB|
|The Economics of Accuracy in Low-Cost, High-Volume Medical Applications||White Paper||English||3MB|
|Measuring Pressure in Chemistry Analyzers||White Paper||English||3MB|
|The High Cost of Low Cost Pressure Sensors||White Paper||English||725KB|
|Pressure Sensor Glossary of Terms||Technical Information||English||128KB|
|Pressure Sensors Plumbing and Mounting Considerations||Technical Information||English||271KB|
|Product||Output||Pressure Range||Measurement Type||Total Error (% Full Scale)|
|SSCDANN001PGAA3||Analog||0 psi to 1 psi||Gage||±2 %FSS|
|SSCDANN001PGAA5||Analog||0 psi to 1 psi||Gage||±2 %FSS|
|SSCDANN001PGSA3||Digital SPI||0 psi to 1 psi||Gage||±2 %FSS|
|SSCDANN005PGAA3||Analog||0 psi to 5 psi||Gage||±2 %FSS|
|SSCDANN005PGAA5||Analog||0 psi to 5 psi||Gage||±2 %FSS|
|SSCDANN006BGAA3||Analog||0 bar to 6 bar||Gage||±2 %FSS|
|SSCDANN006BGAA5||Analog||0 bar to 6 bar||Gage||±2 %FSS|
|SSCDANN010BGAA3||Analog||0 bar to 10 bar||Gage||±2 %FSS|
|SSCDANN010BGAA5||Analog||0 bar to 10 bar||Gage||±2 %FSS|
|SSCDANN010NG2A3||Digital I²C address: 0x28||0 inH2O to 10 inH2O||Gage||±2 %FSS|