Designed to stand the pressure test. Where you need it, when you need it.

Meet the FP5000 Configurable Pressure Transducer

FP5000 Series at a Glance

Specifying a pressure transducer for your application can be challenging due to possible sensor design limitations to meet your needs. Design engineers must consider all pressure measurement factors, environmental factors, and physical sensor size factors. This sensor specification process can be less challenging when having the confidence in a sensor supplier that has extensive design expertise and experience.

Honeywell’s FP5000 pressure sensor has a platform design approach, which allows design engineers to configure the sensor to potentially meet the necessary factors in the specifying process. The FP5000 sensor provides a variety of pressure measurement ranges and types, multiple temperature compensation ranges, global hazardous location approvals by FM approvals, selectable signal outputs, pressure ports and electrical connectors.

The Honeywell Model FP5000, a next-generation media-isolated pressure sensor, is built on Honeywell’s history of high-quality piezoresistive silicon sensing technology and is designed to offer repeatable, reliable, and accurate pressure measurements over time even in a variety of harsh and hazardous environments.

Review the datasheet and the resources section to learn more about how the FP5000 pressure transducer can help in your pressure sensor measurements needs.

Features & Benefits


FP5000 Series offers sensor measurement accuracies of 0.2 %FSS BFSL (Standard accuracy) or 0.1 %FSS BFSL (High accuracy) on pressure measurements to provide consistent and reliable measurements for your application needs. FP5000 Series also offers a sensor response rate of 3500 Hz which provides faster pressure measurement feedback, enabling multiple readings in a short period of time.


The FP5000 sensor’s configurable platform creates a wide range of sensor configurations. This configurable platform enables a sensor to be built to customers’ application requirements and simplifies the overall ordering process through the product nomenclature found on the product datasheet.


With the availability of many pressure and temperature range options, global hazardous location approvals by FM Approvals, and the Ha C276 and 316L stainless steel wetted parts, the FP5000 can be used in a variety of applications. These rugged, stainless steel pressure sensors are built and tested to perform and survive in many demanding environments.


Honeywell has extensive engineering and manufacturing expertise of more than 50 years in offering quality pressure sensors designed to provide repeatable, reliable, and accurate performance in harsh and hazardous environments. Our team is ready to assist you with a pressure sensor solution to meet your application needs.


Take a look at the resources below to learn how you can benefit from the FP5000 transducers in various applications.

Pressure Sensing in Industrial Applications

Application note


Benefits of Media Isolated Pressure Sensors

On-demand webinar


Pressure Measurement on Engine Test Stands

Application note


Pressure Sensors for Hazardous Areas

Application note



FP5000 is Honeywell's newest silicon pressure sensor offering, amongst a variety of pressure sensors we offer for many types of applications. Take a look at a selection of solutions to assess their suitability for your application.

Key Specification / Offering*

Model Z



Model TJE

Type Foil Silicon Foil
Range 0.5 psig to 60,000 psig
1 psia to 60,000 psia
0.3 psig to 5,000 psig
5 psia to 10,000 psia
1 psig to 60,000 psig
1 psia to 60,000 psia
Pressure type



Accuracy 0.25% FS 0.2% FS
0.1% FS
0.1% FS
Operating Temperature -40°C to 125°C PT-02A-10-6P: -73°C to 121°C
DIN Form A: -40°C to 125°C
DIN Form C: -40°C to 90°C
Integral Cable: -40°C to 80°C
-40°C to 85°C
-28°C to 85°C
(varies with configuration choices)
Compensation Temperature 15°C to 71°C 0°C to 60°C
-20°C to 80°C
-40°C to 85°C
-40°C to 125°C
15°C to 71°C
-55°C to 125°C (unamplified only)
Output mV/V; 4 mA to 20 mA; 0 Vdc to 5 Vdc (ratiometric); 0 Vdc to 10 Vdc 4 mA to 20 mA; 0 Vdc to 5 Vdc; 0 Vdc to 10 Vdc mV/V; 4 mA to 20 mA; 0 Vdc to 5 Vdc; 0 Vdc to 10 Vdc
Frequency Response 2,000 - 3,000 Hz
(depends on output)
3,500 Hz 2,000 to 3,000 Hz
(depends on output)
Wetted Parts 17-4 PH stainless steel (<2000 psi) 15-5 PH stainless steel (>2000 psi) HA C276/316L stainless steel 17-4 PH stainless steel (<2000 psi) 15-5 PH stainless steel (>2000 psi)
Case Material 304 Stainless steel 316L Stainless steel 304 Stainless steel
Certifications ATEX cFMus, IECEx, ATEX ATEX

Get in Touch

We would be happy to assist you with your inquiries regarding FP5000. Fill in the contact form and one of our team members will get in touch with you.


What product options are available on the FP5000 pressure sensor?

The FP5000 is a configurable pressure sensor with industrial standard offerings that include selectable pressure ports, electrical connecters, communication outputs, and pressure ranges. You can access the datasheet here and review the available offerings. Please contact our sales team by filling out the contact form for any questions you may have or assistance in configuring the product for your needs.

Where can I get a list of potential applications for the FP5000 pressure sensor?

For details about the FP5000 applications, please download the FP5000 datasheet or application note.

What if I don’t see an option that I need when I’m configuring my product?

To discuss your unique application requirements, please contact our Sales team by filling out the contact form. Please include your application details in the comment section of the form.

Where can I find the wiring pin-out specification for installation?

The wiring pin-out for the available electrical connectors can be found on the FP5000 datasheet, refer to table 7, 8, and 9.

How many points of calibration does the FP5000 pressure sensor offer?

The FP5000 pressure sensor comes standard with a 5-point calibration and the calibration certificate is provided with each sensor. Optional 10-points of calibration is available. Please fill out the contact form to contact our sales team for assistance

Where can I find a CAD dimensional drawing for a specific configuration?

Please reach out to the Test & Measurement Sales team for any CAD dimensional drawings by filling out the contact form.

Does the FP5000 Series pressure sensor have hazardous location approvals?

The FP5000 pressure sensor has Intrinsically Safe Approval Certifications by FM Approvals: FM, ATEX, IEC Ex. Please review the datasheet for more information about the hazardous approval ratings.