¿Qué está buscando?

Este es el cuadro de búsqueda para agregar más información.


Descripción general

Using high pressure autoclave fittings, the Series JH digital pressure test gauge with 0,2 % full scale accuracy uses transducer technology and is manufactured from 15-5 PH Stainess Steel wetted material for high over pressure protection. The transducer technology provides enhanced accuracy over the entire pressure range.

The JH has no moving parts and thus, may provide a long life with fewer re-calibrations. The stainless steel NEMA construction also provides EMI and RFI protection. The JH provides high resolution with an easy to read digital display. There are no operator errors due to interpolation of hash marks or parallax errors. The units can be scaled to read in various engineering units. PSI pressures are read x 10 with the 4½-digit display.

The Model JHB provides a 4 mA to 20 mA, two-wire output. The Model JHE provides a 0 Vdc to 5 Vdc output. The Model JHR has two programmable limits and relays with no analog output. The Model JHX provides a 0 Vdc to 5 Vdc output with two programmable limits and relays for process control or alarm indication. The Model JHW is powered by one or two common 9 V alkaline batteries. The Model JHT is powered by a 110 Vac adapter. The JHV, JHB, JHE, JHR and JHX models are powered by an 11 Vdc to 32 Vdc power supply.

Each unit has a membrane face with raised buttons and tactile feedback for setup and operation. The high, low, and clear but­tons are easily accessible on this front membrane. Zero adjust­ment and zero offset/tare functions are standard on each unit. Calibration and setup parameters are stored on a memory chip to protect from loss even when power is interrupted. Unauthorized set ups and calibrations are also blocked with internal security. Various combinations of the front panel buttons can be deactivated.

Características

  • Pressure ranges from 15000 psi to 60000 psi gage
  • Two programmable limits and relays (optional)
  • Accuracy - 0,2 % full scale
  • High and low detection - Microprocessor based
  • 4 mA to 20 mA (two-wire) and 0 Vdc to 5 Vdc analog outputs (optional)
  • Customer recalibration
  • 4½ digit display with 0,5 in height
  • Zero offset/tare
  • On/off switch disable feature
  • Two programmable limits and relays (optional)
  • NEMA 4 rating (optional)
  • NIST statement (standard)
  • NIST traceable (optional)
  • Optional carrying case and panel mounting ring
Model JH Digital Gauge - Honeywell


Documentos

TÍTULO TIPO DE DOCUMENTO IDIOMA TAMAÑO
Hoja de datos del manómetro de alta presión digital, modelo JH Hoja de datos Inglés 306KB
Model JH External Wiring Diagram - R Power Code Información técnica Inglés 52KB
Model JH External Wiring Diagram - X Power Code Información técnica Inglés 52KB
Model JH External Wiring Diagram - T Power Code Información técnica Inglés 84KB
Model JH External Wiring Diagram - V Power Code Información técnica Inglés 40KB
Model JH External Wiring Diagram - E Power Code Información técnica Inglés 40KB
Model JH External Wiring Diagram - B Power Code Información técnica Inglés 96KB
Model JH External Wiring Diagram - W Power Code Información técnica Inglés 75KB
Model JH Front View Foto Inglés 1MB
Model JH Bottom View Foto Inglés 1MB
Model JH Bottom Angle View Foto Inglés 1MB
Model JH Top View Foto Inglés 1MB
Model JH Top Angle View Foto Inglés 1MB
Guía de familias de transductores de presión de medición y verificación Guía de familias de productos Inglés 1MB
Folleto de descripción general de T&M Folleto Inglés 413KB
Capacidades de medición y verificación aeroespacial Nota sobre aplicaciones Inglés 2MB

Idioma

Redes sociales

Información del sitio

Mapa del sitio

Términos y condiciones

Anular suscripción

Copyright © 2020 Honeywell International, Inc.

Powered By OneLink